Table of Contents
Advertisement
PR EPA RI N G A B E V E R A G E
1
Switch machine on. Power button starts
blinking red while machine is heating up for
approx. 40 seconds. Afterwards power button
lights steady green and machine is ready.
4
Push selection lever to the "HOT" position.
Beverage preparation starts.
7
Take cup from drip tray. Open locking handle.
2
40 sec
Adjust drip tray position according to the
chosen beverage (see page 6-7). Place cup on
drip tray.
5
After reaching the desired level push selection
lever to the "STOP" position. Machine stops
preparation.
8
Pull out capsule holder and remove used
capsule. Put used capsule in dustbin.
STOP
9
3
Open locking handle and pull out capsule
holder. Insert capsule in capsule holder and
insert it back in machine. Close locking handle.
6
After finishing preparation the power button
blinks red for about 5 seconds. During that
time do not open locking handle!
9
Rinse and dry capsule holder with water from
both sides. Insert capsule holder to machine.
Enjoy your beverage!
5 sec
Advertisement
Table of Contents
