Connecting A Vcr - Philips 60PP935299 Directions For Use Manual

Connecting Accessory Devices to Your TV
T
he TV's audio/video (AV) input jacks provide
for direct picture and sound connections
between the TV and accessory devices such as
VCRs, DVD players, and others that have AV out-
put jacks.
This example, which uses the INPUT-AV 1 jacks,
shows you one way you can connect a VCR to
your TV.
Refer to the directions-for-use manual for your
VCR for further information on connections.
To make the connections shown in this example,
you will need:
• one coaxial cable (75 )
• one cable for a video connection (standard
RCA connector)
• two cables for audio connections (standard
RCA connectors) (only one cable is needed for
a nonstereo VCR).
NOTE: The cables are not supplied with your TV.
You should be able to buy them at most stores
that sell electronics. Or you can call our
Customer Care Center at 1-800-531-0039
BEGIN
1
Connect a cable TV or antenna signal to
the ANT IN jack on the rear of the VCR.
2
Connect from the OUT jack on the rear
of the VCR to the ANTENNA IN 75
jack on the rear of the TV.
3
Connect the VIDEO OUT jack on the
rear of the VCR to the INPUT AV1
VIDEO jack on the rear of the TV.
4
Connect the audio output R(ight) and
L(eft) jacks on the rear of the VCR to the
INPUT-AV 1 AUDIO jacks on the rear of
the TV.
NOTE: If the VCR is a mono (nonstereo)
unit, connect only the left audio cable,
which usually has a white connector.
5
Press the AV button on the remote con-
trol as many times as necessary to select
the AV1 source.
6
Turn the VCR on and press PLAY to
view a videotape on the TV.
C
ONNECTING A
ANTENNA IN 75
3
S-VIDEO
Rear of VCR*
* (Example: Philips VCR
model VR674CAT)
AV1
POWER
TV VCR ACC
ACTIVE
SWAP PIP CH CONTROL FREEZE
DN UP
SOUND PICTURE
STATUS/ MENU/
EXIT SELECT
MUTE
VOL CH
1 2 3
4 5 6
7 8 9
TV/VCR
0
A/CH SURF
5
SURF PIP ON/OFF
REC • SLEEP
FORMAT
SAP
AV DOLBY V PROG.LIST
ITR/ HOME HOME PERSONAL
8
VCR
2
Rear of TV
4
INPUT-AV 1 OUTPUT INPUT-AV 2
Y
VIDEO VIDEO
S-VIDEO
Pb
L L
AUDIO AUDIO
Pr
R R
H
ELPFUL
To simplify making connections, audio and
video cables often have color-code connec-
tors. The jacks on your TV are likewise
color coded to match the connectors. The
coding is as follows:
• Yellow for video (composite)
• Red for the right audio channel
• White for the left audio channel
NOTE: If your VCR is mono (non-
stereo), you will connect only one audio
cable. You must ensure that the TV is set
to MONO for the signal source to which
you've connected the VCR (INPUT-AV 1,
INPUT-AV2, or the side panel inputs
[AV3]). Otherwise, you will receive
sound from only one of the TV's speakers.
See page 36.
c c C
You can display the AV1, AV2, or AV3 signal
sources in the PIP window. See page 7 of the
Quick Use and Setup Guide for information on
using the Picture-in-Picture (PIP) feature.
HD INPUT-AV 5
HD INPUT-AV 4
G/Y
R/Pr
B/Pb
V
L L
Coaxial Cable
SYNC
AUDIO
AUDIO
Lead-in from
H
R R
Cable TV Company
or VHF/UHF Antenna
1
H
INT
I O
HECK T UT