Download Print this page

Philips 55PP9401 Quick Use And Setup Manual

55" digital projection television
Hide thumbs Also See for 55PP9401:

Advertisement

Quick Links

Quick Use and Setup Guide
Quick Use and Setup Guide
Safety/Important Notice . . . . . . . . . . . . . . . . . . . . . . . .1
Best Viewing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Making a Basic Antenna or Cable TV Hookup . . . . . . .1
Making a Basic VCR Hookup . . . . . . . . . . . . . . . . . . .2
Using the Front Panel Jacks . . . . . . . . . . . . . . . . . . . . .2
Performing Basic TV Operations . . . . . . . . . . . . . . . . .3
Learning Remote Control Buttons . . . . . . . . . . . . . . . .3
Using the On-screen Menu . . . . . . . . . . . . . . . . . . . . . .4
Setting the Language Control . . . . . . . . . . . . . . . . . . . .4
H
U
OOKING
B
V
EST
IEWING
T
he major benefit of this projection
television is its large viewing
screen. To see this large screen at its
best, test various locations in the
room to find the optimum spot for
viewing.
NOTE: Be sure to allow a free flow
of air to and from the perforated
back cover of the set.
A
/C
TV H
NTENNA
ABLE
OOKUP
T
he TV signal coming into your
home may be from a Cable TV
company or a combination UHF/VHF
antenna. In either case, the basic con-
nection to the TV is very easy.
A Cable TV signal may use a cable
box or a direct connection and can
receive up to 125 channels.
A UHF/VHF antenna can receive
normal broadcast channels 2–13 for
VHF and 14–69 for UHF band sig-
nals.
Unless your TV is connected to a
cable TV system or to a centralized
antenna system, a good outdoor color
TV antenna is recommended for best
performance. But if you are located in
an area with an exceptionally good
signal that is free from interference
and multiple image "ghosts," an
indoor antenna may be sufficient.
TV Signal from
Cable Company
Cable Converter Box
T
C
ABLE OF
ONTENTS
Selecting the Tuner Mode . . . . . . . . . . . . . . . . . . . . . .5
Using the Auto Program Control . . . . . . . . . . . . . . . . .5
Using the Channel Edit Control . . . . . . . . . . . . . . . . . .6
Using the Channel List Control . . . . . . . . . . . . . . . . . .6
Setting the TV's Clock . . . . . . . . . . . . . . . . . . . . . . . . .7
Using the Auto IntelliSense
Using the Formats Control . . . . . . . . . . . . . . . . . . . . . .8
Learning More about the Rear Panel Jacks . . . . . . . . . .8
Y
P
P
OUR
ROJECTION
To avoid cabinet warping, cabinet
color changes, and increased
chance of set failure, do not place
the TV where temperatures can
become excessively hot—for exam-
ple, in direct sunlight or near a
heating appliance.
Connect the coaxial cable/con-
nector to the ANT(enna) A input on the
back of the TV.
If you're using a cable converter box,
connect the OUT(put) plug from the
converter to the ANT(enna) A input on
the back of the TV.
Combination VHF/UHF
Antenna
(Outdoor or Indoor)
F-type
1
F-type
75
Coaxial
ANT A
Cable/Connector
OR
F-type
Coaxial
75
Cable/Connector
Focus Control . . . . . . . .7
TV (B
ASIC
Magnetic fields, such as those of
external speakers, may cause the
picture to distort if the speakers
are placed too close to the televi-
sion. Move the magnetic field
source away from the TV until
there is no picture distortion.
If the TV signal is from a 75
F-type coaxial cable/connector,
then you're ready to connect it to the
antenna input on the back of the TV.
If you're using a cable signal with a
convertor box, first connect the cable
TV signal to the cable signal IN(put)
plug on the converter box. Then con-
nect from the OUT(put) on the con-
verter box to the ANT(enna) input on
the back of the TV.
Note: A 300 to 75
required if the UHF/VHF antenna you are
300 to 75
using has a "twin-lead wire" instead of the
Adapter
single F-type 75 coaxial cable/connector.
(483521827003)
Twin-lead
Wire
Coaxial
75
Cable/Connector
2
EL6487E002 H462952
HDTV Monitor
HDTV Monitor
55PP9401
55PP9401
60PP9401
60PP9401
WARNING: TO PREVENT FIRE OR
SHOCK HAZARD DO NOT EXPOSE
THIS UNIT TO RAIN OR EXCES-
SIVE MOISTURE.
TV C
ONNECTIONS
Adapter may be
Back of TV
)
CHECK IT OUT
To set the TV to
select only the chan-
nel numbers in your
area see how to
"Program" or "Add"
channels in memory
on page 5 (Auto
Program section).
If you intend to
use separate UHF
and VHF antennas,
you will need an
optional combiner to
connect to the TV.
To order any option-
al accessory contact
your dealer or call
the toll-free accesso-
ry ordering number
(1-800-851-8885).
See page 8 for
more information on
the Rear Panel
jacks.

Advertisement

loading

Summary of Contents for Philips 55PP9401

  • Page 1 Quick Use and Setup Guide Quick Use and Setup Guide ABLE OF Safety/Important Notice ......1 Best Viewing ....... .1 Making a Basic Antenna or Cable TV Hookup .
  • Page 2 OOKING VCR H ASIC OOKUP ollow the steps to the right Connect your antenna or to connect a basic antenna cable TV signal to a two-way signal splitter. or cable TV signal to a VCR, and then the VCR to the TV. Refer to the owner’s manuals cable to each of the output plugs on for your VCR and cable con-...
  • Page 3 ERFORMING ELEVISION n this section, learn how Press the POWER to use the TV buttons for button to turn the TV on. basic operation of the TV. See page 4 for information on After having connected how to adjust or set TV con- a broadcast signal source to trols through the on-screen the TV, press the INPUT/EXIT...
  • Page 4 his section explains how Press the to make selections or MENU/SELECT button on the adjustments within the on- remote to display the On-screen screen menu. The menu is Menu. Or press the simply a list of your TV’s MENU/SELECT button on the features or controls.
  • Page 5 UNER y choosing a Tuner Mode, Press the you are telling the TV the MENU/SELECT button on type of broadcast signal you the remote control to show the have connected. Select Antenna on-screen menu. if you are using an indoor or outdoor antenna.
  • Page 6 HANNEL elect the correct Tuner Mode and run Auto Program to automatically store active TV channels (see the sections on those controls in this publication). Then use Channel Edit to add or delete chan- nels from the TV’s memory. HANNEL hannel List allows you to Press the review labeled channels...
  • Page 7 LOCK ou must set the time on the TV’s clock before you can use the 4 Event Program or Sleep Timer (see the Directions for Use manual for details on those features). NTELLI ENSE ou can automatically adjust the TV’s picture convergence using Auto IntelliSense Focus.
  • Page 8 ORMATS he Formats control is very useful when setting up reception for High MENU/SELECT button on the remote control to show Definition, Standard Definition, and the on-screen menu. NTSC signals. The Comp Color Type function allows you to automatically change tint and color coordinate for DOWN button repeatedly DTV programs.

This manual is also suitable for:

55pp94019955-digital projection television 55pp940155-digital projection television 55pp94019960pp94019