Advertisement
ETC Installation Guide
5" and 8" Touchscreen
Vertical mounted back box
(portrait operation)
US 1-gang back box shown in both portrait and landscape orientation.
Environment
• For dry location use only, ambient temperature 0°C–50°C
(32°F–122°F)
• Humidity 10%–95% (non-condensing)
Electrical
The touchscreen is powered by Power-over-Ethernet (PoE 802.3af).
A standard PoE switch (provided by others) not exceeding 15 W may be
used to provide both power and a network connection to the touchscreen
using an Ethernet cable. All Ethernet terminations must follow IEEE 802.3
and be terminated to the T568B standard.
If a PoE switch is not available, a compliant PoE midspan injector may be
used alternatively. The touchscreen operates as a PoE Class 0 (zero)
device (0.44–12.95 W) and consumes 7 W maximum.
Note:
bootloader/firmware updates to the unit as corruption of the data
or software may occur, perhaps even rendering the unit
inoperable.
5" and 8" Touchscreen
Horizontal mounted back box
(landscape operation)
Power must not be disconnected during
Page 2 of 4
ETC
Advertisement
