Advertisement
Getting Started With The Forge Clear Ice Press
Installation requirements
CAUTION
WARNING
●
Ice press requires a dedicated power source capable of providing 15A at 115V AC.
●
Product is designed to be installed indoors. Do not use your ice press outdoors.
●
Product must be installed upright on a flat, level surface that is able to support the
total weight when full of water.
●
Ensure a minimum of three inches (3") clearance around the ice press.
●
Install the product in an environment with an ambient temperature between 55°F
and 90°F.
●
Do not place the product near heat sources such as ovens or cooktops.
●
Do not place the product in direct sunlight.
Preparing Forge Ice Press for Operation
1.
Carefully remove packing material. Do not use sharp tools that can damage or
scratch the ice press.
2.
Ensure all components are present. If any item is missing, please contact
forge@firstbuild.com.
3.
Place the ice press upright on a flat, level surface and plug it in.
Lifting Hazard: It is recommended to have two people move and install the
ice press in order to prevent injury.
To reduce the risk of fire, electric shock, serious injury, or death, ensure that
the power source is capable of providing 15A at 115V AC.
4
Advertisement
