Table of Contents
Advertisement
Errors
Table continued from last page
Problem/error
updated on the
display unit).
Display does not
light up.
The wording on
the display unit is
not in your
language.
Wet laundry
("unbalance" will
appear on display)
There are traces of
grease (or grease
rolls) on the
clothes.
There are still
stains on the
laundry.
There are white
residues of
washing powder
on the laundry.
36
what to do?
Cause
•
UKS* (*unbalance system)
stability system engaged
due to unevenly distributed
laundry.
•
Low mains voltage.
•
Power supply failure.
•
There is no voltage in the
appliance.
•
You have not selected your
preferred language yet.
•
A small amount of laundry
will often be unevenly
distributed.
•
The laundry was very
greasy.
•
You used bleach-free
liquid detergent or powder
detergent for coloured
laundry.
•
You selected an unsuitable
program.
•
This is not due to poor
rinsing by your washing
machine, but rather due to
phosphate-free detergents
What to do?
•
Program time is extended due to the need
to redistribute the laundry in the drum.
•
Washing machine needs more time
because the power mains voltage is too
low.
•
Program time is extended by the duration
of the power supply failure.
•
Check if the plug is connected to the
power outlet and whether there is electric
current (or voltage) in the outlet.
•
Choose the preferred language (see
"STEP 5 / Settings / Choosing the
language").
•
Loosen and redistribute the laundry and
select the Drain or Spinning program.
•
Increase the amount of laundry in the
washing machine and restart the program
(see "STEP 7: Start the wash / Adding or
removing laundry after the start of the
program").
•
Wash the laundry again. When your
laundry is this heavily soiled, add more
washing powder or use a liquid detergent
in combination with a more powerful
(longer) program.
•
Use a detergent that contains bleach.
•
Use special stain removers.
•
Immediately rinse the laundry again.
•
Use liquid detergents that do not contain
zeolites.
Advertisement
Table of Contents
