Table of Contents
Related Manuals for MJ LED LIGHTNING MJ-1006A-4IN1
Summary of Contents for MJ LED LIGHTNING MJ-1006A-4IN1
- Page 1 LED Moving Head Light MJ-1006A-4IN1 User manual Thank you for choosing our LED moving head light. For the sake of your safety, Please read and follow these instructions carefully and keep this manual in a safe place for future reference.
-
Page 2: Table Of Contents
Catalogue Chapter Page Safe Usage Of The Product -----------------------------------------------------------------------------------------3 Install The Equipment ------------------------------------------------------------------------------------------------4 Power Code Connection ---------------------------------------------------------------------------------------------4 DMX Connection ------------------------------------------------------------------------------------------------------5 DMX Terminator -------------------------------------------------------------------------------------------------------6 Function Set --------------------------------------------------------------------------------------------------------------6 Operation Menu ---------------------------------------------------------------------------------------------------------7 Maintenance --------------------------------------------------------------------------------------------------------------9 Keeping The Product Clean -----------------------------------------------------------------------------------------10 Trouble Shooting --------------------------------------------------------------------------------------------------------10 Equipment and Appendix ----------------------------------------------------------------------------------------------10 Channel List ----------------------------------------------------------------------------------------------------------------11... -
Page 3: Safe Usage Of The Product
SAFE USAGE OF THE PRODUCT When unpacking and before disposing of the carton, check there is no transportation damage before using the product. Should there be any damage caused by transportation, consult your dealer and do not use the apparatus. The product is for indoor use only, IP20. -
Page 4: Install The Equipment
Install The Equipment: Use 1pcs clamp and safety cord(need to purchase).Use clamp fix with light hook which in the packing box with light, then use screw install to the bottom of lamp. Hang the fixture on the structure and fasten the screws attached to each clamp. Make sure the light is installed reliable, and confirm the light which you fixed is strong enough for hanging the light. -
Page 5: Dmx Connection
DMX Connection: Connection between the controller and a projector and between one projector and another must be made with a 2 core-screened cable, with each core having at least a 0.5mm diameter. Connection to and from the projector is via cannon 3 pin (which are included with the projector) XLR plugs and sockets. -
Page 6: Dmx Terminator
DMX Terminator: In the Controller mode, at the last fixture in the chain, the DMX output has to be connected with a DMX terminator. This prevents electrical noise from disturbing and corrupting the DMX control signals. The DMX terminator is simply an XLR connector with a 120Ω (ohm) resistor connected across pins 2 and 3, which is then plugged into the output socket on the last projector in the chain. -
Page 7: Operation Menu
Operation Menu: Menu Structure chart Main Menu Sub Menu Address DMX Address Set(001-512) DMX Mode 10/15CH Run Mode Auto Mode Auto1－Auto8 Sound Mode Return Test Mode Pan test 0－255 Tilt（0-255） 0－255 Red（0-255） 0－255 Green（0-255） 0－255 0－255 Blue（0-255） White（0-255） 0－255 Return Chinese Language... - Page 8 Display Reverse ON/OFF Factory Set RESET Touch correct Motor x Off Set -128－+127 Motor y Off Set -128－+127 Return **H**M**S Sys Info On Time（The time of now） *****H**M Run Time（Total time of using） Soft ver T008A-LM36W-F001 Running Mode Dmx Address Temperature(Display current temperature）...
-
Page 9: Maintenance
over number 9,only ID code corresponding to the front two value which in 16 channel, then other channel value are available now. Pan reverse set Tilt reverse set Handspike delay, when switch on handspike delay, the controller handspike can achieve soft dimming effect. -
Page 10: Keeping The Product Clean
these be damaged, call a qualified technician before replacement. The projector has thermal protection device that will switch off the projector in case of overheating. Should either of these operate, check that the fans are not blocked, and if they are dirty, clean them before switching on the projector again. -
Page 11: Channel List
Channel List: 15CH MODE Channel Value Control function 0-255 Main dimming ON 0-255 0-255 Green 0-255 Blue 0-255 White 0-255 User customs color 0-255 0-255 Tilt Pan fine（16Bit） 0-255 Tilt fine（16Bit） 0-255 0-255 XY motor speed from quick to slow No strobe 1-255 Strobe from slow to quick... -
Page 12: Technical Parameters
Technical Parameters: Construction: Composite plastic, die-casting aluminum, Voltage: AC100V-240V; 50/60Hz Power Consumption: 400W (220V) LED Bulbs: 4IN1*36LEDs LED Current: 500mA LED Lifetime: 50000Hours Colors: RGBW color mixing Adjusts the light: 0-100 electron adjusts the light, various colors may alone move also may mix the color tone Strobe: 1-25/second high speed strobe, but single color Mixes the color strobe Head Movement: Pan 630°, Tilt 270°, with auto position correction and electronic replacement...
Need help?
Do you have a question about the MJ-1006A-4IN1 and is the answer not in the manual?
Questions and answers