Page 1
ZOOM LED MOVING HEAD LIGHT MJ-1006B User Manual Thank you for choosing our LED moving head light. For the sake of your safety, Please read and follow these instructions carefully and keep this manual in a safe place for future...
Zoom Moving Head Wash 3610 MJ-1006B User Manual ver2.0 Catalogue Chapter Page Safe Usage Of The Product -----------------------------------------------------------------------------------------3 Install The Equipment ------------------------------------------------------------------------------------------------4 Power Code Connection ---------------------------------------------------------------------------------------------4 DMX Connection ------------------------------------------------------------------------------------------------------5 DMX Terminator -------------------------------------------------------------------------------------------------------6 Function Set --------------------------------------------------------------------------------------------------------------6 Operation Menu ---------------------------------------------------------------------------------------------------------7 Maintenance --------------------------------------------------------------------------------------------------------------9...
Zoom Moving Head Wash 3610 MJ-1006B User Manual ver2.0 SAFE USAGE OF THE PRODUCT When unpacking and before disposing of the carton, check there is no transportation damage before using the product. Should there be any damage caused by transportation, consult your dealer and do not use the apparatus.
Zoom Moving Head Wash 3610 MJ-1006B User Manual ver2.0 Install The Equipment: Use 1pcs clamp and safety cord(need to purchase).Use clamp fix with light hook which in the packing box with light, then use screw install to the bottom of lamp. Hang the fixture on the structure and fasten the screws attached to each clamp.
Zoom Moving Head Wash 3610 MJ-1006B User Manual ver2.0 DMX Connection: Connection between the controller and a projector and between one projector and another must be made with a 2 core-screened cable, with each core having at least a 0.5mm diameter. Connection to and from the projector is via cannon 3 pin (which are included with the projector) XLR plugs and sockets.
Zoom Moving Head Wash 3610 MJ-1006B User Manual ver2.0 DMX Terminator: In the Controller mode, at the last fixture in the chain, the DMX output has to be connected with a DMX terminator. This prevents electrical noise from disturbing and corrupting the DMX control signals.
Zoom Moving Head Wash 3610 MJ-1006B User Manual ver2.0 Operation Menu: Menu Structure chart Main Menu Sub Menu Address Dmx Address Set(001-512) DMX Mode 16CH / 12CH Run Mode Auto Mode Auto1-Auto8 Sound Mode Return Test Mode Pan test 0-255...
Page 8
Zoom Moving Head Wash 3610 MJ-1006B User Manual ver2.0 Display Reverse ON/OFF LOGO(ON/OFF) ON/OFF Factory Set RESET ?) Touch correct Motor x Off Set -128-+127 Motor y Off Set -128-+127 Return **H**M**S Sys Info On Time(The time of now) *****H**M Run Time(Total time of using)...
Zoom Moving Head Wash 3610 MJ-1006B User Manual ver2.0 over number 9,only ID code corresponding to the front two value which in 16 channel, then other channel value are available now. Pan reverse set Tilt reverse set ...
Zoom Moving Head Wash 3610 MJ-1006B User Manual ver2.0 socket of the projector, they should only be replaced by fuses of the same specification. Should these be damaged, call a qualified technician before replacement. The projector has thermal protection device that will switch off the projector in case of overheating. Should either of these operate, check that the fans are not blocked, and if they are dirty, clean them before switching on the projector again.
Zoom Moving Head Wash 3610 MJ-1006B User Manual ver2.0 Channel List: 16CH MODE Channel Value Control function 0-255 Main dimming ON 0-255 0-255 Green 0-255 Blue 0-255 White 0-255 User customs color 0-255 0-255 Tilt 0-255 Pan fine(16Bit) 0-255 Tilt fine(16Bit)...
Zoom Moving Head Wash 3610 MJ-1006B User Manual ver2.0 Technical Parameters: Construction: Composite plastic, die-casting aluminum, Voltage: AC90V-240V; 50/60Hz Power Consumption: 420W (220V) LED Bulbs: 4IN1*36LEDs LED Current: 500mA LED Lifetime: 50000Hours Colors: RGBW color mixing Adjusts the light: 0-100 electron adjusts the light, various colors may alone move also may mix the...
Need help?
Do you have a question about the MJ-1006B and is the answer not in the manual?
Questions and answers