Changing The Selections After Programme Has Started - Beko BWD106 User Manual

If the Remote Control Function is
selected, the door will be locked. In
order to open the door you must de-
activate Remote Start Function by
either pressing the Remote Start
button or changing the programme
position.
Opening the loading door in case of
power failure:
In case of a power failure, you can
use the loading door emergency
handle under the pump filter lid to
manually open the loading door.
Before opening the loading door,
make sure that there is no water in
the machine to avoid flooding.
1. Turn off and unplug the appliance.
2. Open the pump filter lid.
3. Pull down the loading door emergency
handle with a tool and release. Then
open the loading door.
4. If the loading door does not open then
repeat the previous step.
6.16 Changing the Selections After
Programme has Started
Adding Laundry after the Programme
has Started
If the water level in the machine is suitable
when you press Start/Pause button, the
door lock will be deactivated and the door
will open, allowing you to add garments.
The door lock icon on the display goes off
when the door lock is deactivated. After
adding garments, close the door and press
Start/Pause button once again to resume
the washing cycle.
If the water level in the machine is not suit-
able when you press Start/Pause button,
the door lock cannot be deactivated and
the door lock icon on the display remains
on.
If the temperature of the water in-
side the machine is above 50°C,
you cannot deactivate the door lock
for safety reasons, even if the water
level is suitable.
EN / 38
: