Modecom MC-AWR11 Quick Start Manual page 5

MODECOM ROUTE
Т I
Interface Description
Press the button and hold it for 1 second, to enable
WLAN.
Press the button and hold it for 1 second to 3 sec-
WLAN/WPS onds, it does not take effect.
Press the button and hold it for 3 or more than 3 sec-
onds, to initialize WPS negotiation.
RJ-11 interface, for connecting to the ADSL interface
or a splitter through a telephone cable.
RJ-45 interface, for connecting to the Ethernet inter-
LAN1/2/3/4 [face of a computer or the Ethenet devices through an
Ethernet cable.
DSL
Power Power interface, for connecting to the power adapter
ON/OFF Power switch, power on or power off the device.
Reset to the factory default configuration. Keep the
device powered on, and insert a needle into the hole
for 3 to 6 seconds, then release it. The deivce is reset
to the factory default configuration.
Reset
System Reguirements
. 10/100M Ethernet card installed on your PC (socket RJ45)
. An Ethernet-Based Cable (tip - RJ45)
. TCP/IP network protocol for each PC
. Internet browser: Internet Explorer, Firefox, Chrome, Safari,
Opera or others.
Features
. Supported protocols to establish a connection to the Internet:
PPPoE dial-up / PPPoA dial-up / 1483Bridged / 1483Routed /
MER / IPoA The router supports VC and LCC encapsulation.
. Support for multiple ADSL standards. Download speed con-
nection to 24Mb/s, upload to 1 Mb/s