Philips BDP5010/F7 Service Manual page 17

9. Press [STOP] button on the remote control unit.
Fig. h appears on the screen and Fig. i appears on
the VFD.
" ******* " differ depending on the models.
Version Info
F/W Name : *******
Version : *.***
Region : *-*
EEPROM CLEAR : OK
EEPROM CLEAR <STOP>
Fig. h
Fig. i
10. To exit this mode, press [
EXIT <POWER>
] button.
1-7-2
How to Verify the Firmware Version
1. Turn the power on.
2. Remove the disc on the tray and close the tray.
3. Press [1], [2], [3], [4], and [INFO] buttons on the
remote control unit in that order.
Fig. j appears on the screen.
" ******* " differ depending on the models.
Version Info
F/W Name : *******
Version : *.***
Region : *-*
EEPROM CLEAR <STOP>
Fig. j
4. To exit this mode, press [
EXIT <POWER>
] button.
E5K13FW