System Control Timing Charts - Philips BDP5012/F7 Service Manual

SYSTEM CONTROL TIMING CHARTS

Power on
Hand close
SLED moves
Start
SLED position Hand close
initialization
Pick-up position
moves
Power on
SLED moves
End
[ Tray Close ]
Start
Tray close
detection
SLED position
initialization
Pick-up position
[ Tray Close ]
Note:
If other sequence is received during the sequence,
it will stops and other sequence starts.
Only if SLED is moving, it will stop after the moving is finished.
1-13-1
Start
moves
End
[ Tray Open ]
Start
SLED inner
around moves
Tray open
[ Tray Open ]
End
B2N_TI