Disassemble The M/B - Philips DVDR520H/00 Service Manual

4.4 Disassemble the M/B:

IDE cable
(PICTURE 13)
(PICTURE 16 )
3
2
1
(PICTURE 18)
Step 1: Unplug the power cord and IDE cable of the HDD module (as PICTURE 13)
Step 2: Remove the HDD module from the M/B first, unfix the 4 screws of the HDD
module (as PICTURE14, 15, 16)
Step 3: Unfixed the screw of the M/B and remove all the cable (7 cables)
connected to M/B (as PICTURE 17 & 19)
Step 4: Loosen the 5 screws off the rear panel (as PICTURE 18)
Note: Tuner can be removed and reused if isn't broken when M/B is disassembled
Power cord
(PICTURE 14)
SCREWS
4 5
4-4
SCREWS
2
1
1
(PICTURE 17)
(PICTURE 19)
4
3
(PICTURE 15)
1
2