Disassemble The Drive - Philips DVDR520H/00 Service Manual

4.2 Disassemble the Drive:

Power cord
IDE cable
(PICTURE 5)
4
3
(PICTURE 7 )
Step 1: Tray out
PICTURE 6)
Step 2: Tray in
Step 3: Disassembly the top cover
Step 4: Unplug the power cord and IDE cable (as PICTURE 5)
Step 5: Remove the four fixed screws of the drive (screw 1~4 as PICTURE 7 &8)
Step 6: Remove the Drive
PS: If the tray is jammed can't be out on step 1, please unplug the power cord
first ,then follow the step 3-5 ,and then lift up the drive on the rear side to separate
SCREWS SCREWS
pull out the door and lift up to disassemble the tray door (as
Power off unplug the power cord
4-2
(PICTURE 6)
(PICTURE 8)
1
2