Table of Contents
Advertisement
One Time Setup
When the unit is turned on the first time, setup
Process of Setup
mode is entered automatically.
Aaa
Press POWER on
| Language
>
channelj =
Clock |
the remote or unit.
Select the language.
SELECT LANGUAGE
guag
A Power
PUSH
CH á :English
for English
OPRIMIR CH Y :Español
APP.
VOL
+ Francais
for Spanish
(Español)
2 CHANNEL
for French
» UP/DOWN
(Frangais)
* If wrong language is set, complete "Reset all unit Memory
Functions" steps page 39.
e If you use a cable box, it must be left on.
ØJ VOLUME
Start Channel Auto Set
CHANINEL/ CLOCK AUTO SET | nd Clock Auto Set.
CONNECT ANTENNA CABLE
A tenet TS Coca
Press CH A.
LOCAL
PBS CH
THEN...
PLEASE PUSH CH UP KEY
| CH AUTO SET PROCEEDING |
AUTO CLOCK SET
PROCEEDING
(Case 1)
(Setup completed)
(Case 2)
2|
(Setup incomplete)
Press CH A to exit.
n 7/2000 WED 12:00PM
* If your area observes
f
daylight saving time,
A
but you would like to
Akasa
AUTO CLOCK SET
turn the DST feature
IS INCOMPLETE
COMPLETED
off, complete the
See Case 2
"To Set or Reset the
PUSH ACTION TO SET CLOCK
END : PUSH CH UP KEY
Clock" step on page
next page.
37 and set DST: OFF.
* If your area observes daylight saving
time and DST is set to ON, but the
time is incorrect; complete the Time
Zone Adjust steps on the next page.
IMPORTANT NOTE FOR AUTO CLOCK SET
+ Auto clock set is performed the first time when the unit is turned off each day. If used, a cable box must be left on and
tuned to the PBS channel at the time the unit power is turned off if you want auto clock Set to be done.
* If using a DSS receiver, it must be turned off for auto clock set.
e lí a Cable Box or DSS receiver is connected to the unit via Audio/Video Jacks, an RF coaxial cable must also be
connected for auto clock set and channe! auto set features.
+» If for any reason the time is changed manually, automatic time correction will not occur.
8
For assistance, call 1-800-211-PANA(7262)
Advertisement
Table of Contents
