Panasonic Omnivision PV-C1320W Operating Instructions Manual page 22

Tape Operation
Commercial Skip
This unit fast forwards (skips) over 1-3 minutes of recorded
tape during Play mode.
1 Set Skip Time.
Press CM Skip repeatedly
to select skip time.
OFF
1st er min Skip
2nd hess min Skip
3rd Press —-3 min Skip
Program End Search |
It is easy to detect the end of a recorded program so that you may
continue or begin a new recording.
Display SELECT
a SEARCH MODE in
Playback or Stop mode.
Press SEARCH on the remote.
SELECT SEARCH MODE Display PROGRAM END
ZERO SEARCH SEARCH.
1) Press AV
PROGRAM INDEX SEARCH i Select.
SELECT: a Y KEY
SET :> KEY
END : SEARCH KEY
to start search.
Example of Program End Search operation.
Fig.1 PLAYBACK DIRECTION ——+
Press SEARCH button {End Point]
FF
Press SEARCH button |
FF
_ Fig.3 If search exceeds few seconds in BLANK area.
Press SEARCH button
a a | S|
FF l
if Program End Point is found.
The search continues slightly beyond the end point, then search and reverse
search and plays the last few seconds of the program and finally stop.
[rea IO Posen 26a
Press SEARCH button SEARCH
P .............. m
: REVERSE
FF
seat SEARCH
c=
* If Program End Search is started very close to an index mark, one
program may be skipped over.
+ If you want to cancel Program End Search, Press PLAY or STOP.
22 For assistance, call 1-800-211-PANA(7262)
g.2
¡[E REZA Erem] Eran]
Your unit is equipped with several time
saving features as well as convenient
automatic functions which make tape
operation easier than ever.