Table of Contents
Advertisement
ape Operation
(continuec
Direct Access (For Normal and/or Timer recordings)
Go directly to the desired recording.
Display SELECT
SEARCH MODE screen.
Press SEARCH
in
Playback or Stop mode.
* If there are no Timer
Recordings on the Program
Index List, go to step 3.
SELECT SEARCH MODE
Display INDEX screen.
ZERO SEARCH
1) Press AY
PROGRAM END SEARCH
to select
PROGRAM
INDEX
SEARCH
"INDEX
SELECT:A Y KEY
»
ee
SEARCH.
display.
* This screen appears only if
there are Timer Recordings.
INDEX
Select the recording
3
number.
Press
bat
| NUMBERED
Shoe
| keys.
Só
* To calculate number, see below.
INDEX SEARCH
04
Start search.
Press FF or REW.
* When search is
finished, playback
begins.
To calculate the Index Number
Example 1:
If you are watching recording 4 and you want to watch
recording 2, enter 3 in step "3" and press REW.
E aaa ae
aja [at4ats|
6 [7
Example 2:
If you are watching recording 2 and you want to watch
recording 6, enter 4 in step "3" and press FF.
SNS
Eee BEER
Es
E
NOTE: | indicates start points of each recording.
VHS Index Search System is ...
Each time recording is made, an invisible
index mark is placed on the tape. When
timer recordings are made, program
index and information are also included.
These index marks can be used to
access or scan recordings.
Models PV-C1320/1330W/1340
unit is shown here.
ODP
2 SELECT/SET
A:CH UP
VW :CH DOWN
P :VOL UP
* Make each entry within 10 seconds, or
the Index Search mode will be canceled.
* If these VHS Index Search Systems are
started very close to an index mark, that
index mark may not be counted in the
search.
24
For assistance, call 1-800-211-PANA(7262)
Advertisement
Table of Contents
