Table of Contents
Advertisement
This hydraulic floor jack is designed to lift, but not support, one end of a vehicle.
Immediately after lifting, load must be supported by at least two appropriately rated jack
stands.
1. Locate the jack in a suitable working area.
2. Inspect the jack before each use. Do not use jack if damaged, altered, modified, in poor
condition, leaking hydraulic fluid, or unstable due to loose or missing hardware or parts.
Make corrections before using
3. Use jack on level and solid ground, preferably concrete. Avoid asphalt as jack may sink
in. Chock wheels of vehicle.
4. Ensure the vehicle parking brake is engaged, engine is switched off and transmission in
gear (or "PARK" if automatic).
5. Ensure minimum distance of 18" between vehicle and static objects such as doors,
walls, etc, to allow for vehicle tilting.
6. Ensure all non-essential persons keep a safe distance while the jack is in use.
7. Ensure there are no passengers in the vehicle.
8. Place jack under only those lifting points recommended by vehicle manufacturer (see
vehicle handbook)
9. Check that the lifting point is stable and centered on the jack saddle.
10. Ensure the jack wheels are free to move and that there are no obstructions.
11. Danger : Use the jack for lifting only
12. Ensure there are no persons or obstructions beneath the vehicle before lowering.
13. Use suitable jack stands under the vehicle before proceeding with any task.
14. Use a qualified person to lubricate and maintain the jack.
15. Wear ANSI-approved safety goggles and heavy-duty working gloves during use.
DESCRIPTION
SPECIFICATIONS
Rated capacity 2 Ton (4,000 LB)
Min. Height
Max. Height
Length
Net Weight
SAFETY PRECAUTIONS
2-3/4"
23-1/2"
32-5/8"
100 LB
1
Advertisement
Table of Contents
