Table of Contents
Advertisement
Set up
2
A
Finding the viewing channel
A
Press
on the DVD player's remote control.
B
Press SELECT button until [DVD] is lighted on the
remote control display panel.
C
Switch on the TV.
D
Press SYSTEM MENU on the DVD player's remote
control.
GENERAL SETUP PAGE
DISC LOCK
PROGRAM
OSD LANGUAGE
SCREEN SAVER
SLEEP
DIVX(R) VOD CODE
E
Press '0' on the TV's remote control, then repeatedly
press the Channel Down button until you see the
DVD background screen. This is the correct viewing
channel for the DVD player.
Note For some TVs, to fi nd the correct viewing
channel, you can keep pressing the AV or SELECT
buttons, If still unable to fi nd the correct viewing
channel, check the connections again or check your
TV's user manual.
B
Language preference setup
Use the DVD player's remote control to select the
desired On-screen language, Audio language, Subtitle
language and Menu language you preferred.
Selecting On-screen language
A
Press
to select {General Setup Page}.
B
Press
to highlight
GENERAL SETUP PAGE
DISC LOCK
PROGRAM
OSD LANGUAGE
SCREEN SAVER
SLEEP
DIVX(R) VOD CODE
C
to select a language and press OK.
Press
Note The On-screen language for the setup menu
will remain once you set it, regardless of various disc
languages.
Need help?
User Manual
For more product information refer to the user manual of the DVD player
Online
Go to www.philips.com/support
1_dvp7400_qsg_98_eng_24061.indd 2
Directions For Use
, then press
.
{OSD Language}
ENGLISH
3139 785 32310
3
Enjoy
A
Start playback
A
Playback may start automatically when a disc has
been loaded in the disc tray.
Note If a disc menu appears on the TV:
1)
Press
to scroll through the options
available in the DVD menu.
PLAY
2)
Press
on the option
you want to start playback
B
Press PLAY
to start
playback.
C
To stop playback, press
STOP
.
D
Press DISC MENU to
go back to the disc
menu anytime.
Troubleshooting
For more troubleshooting tips, see the user
manual.
No power
•
Check if the AC power cord is properly connected.
•
Press the STANDBY-ON on the front of the DVD
player to turn on the power.
No picture
•
Check connection to TV and ensure the plugs are
fi rmly in place.
No sound or distorted sound
•
Adjust the volume
•
Check audio connections are in the correct input
source.
Remote control does not work
•
Check the batteries are loaded correctly or replace the
batteries with new ones.
•
Reduce the distance between the remote control and
the DVD player.
•
Point the remote control directly toward the IR
sensor.
2005 C Koninklijke Philips N.V.
All rights reserved.
12 NC 3139 246 24061
www.philips.com
SL/0631/98/93_06/02
3.
EN 9
DISC
MENU
OK
PLAY
STOP
2006-08-01 2:42:14 PM
Advertisement
Table of Contents
