Table of Contents
Advertisement
Push the water drain hose as far
3.
as it will go into the connecting
piece.
Insert the water drain hose into the
4.
hose guide.
Ensure that you do not bend the
water drain hose.
Connect the appliance to the water
5.
outlet.
→ "Water outlet connection types",
Page 15
Tip: To collect condensation in the
condensation container again (e.g. if
you change where the appliance is
located), carry out these steps in re-
verse order.
Installation and connection en
Water outlet connection types
ATTENTION!
In the event of a blocked or covered
outlet, accumulated wastewater can
flow back into the appliance.
Before operating the appliance, en-
▶
sure that the wastewater drains
away quickly and eliminate any
blockages.
Drainage into a
siphon.
Drainage into a
wash basin.
2
1
Drainage into a
gully.
Secure the con-
nection point with
a (12-22 mm)
hose clamp.
Secure the water
drain hose with a
hose guide at a
height of at least
80 cm and no
more than 100
cm.
Note: You can
use the Y-distrib-
utor → Page 26
to connect the
water drain hose
of an additional
appliance, such
as a washing
machine, to the
same siphon out-
let.
Push the water
drain hose fully
through the and
secure it using
fixing material.
Secure the elbow
at a height of no
more than 100
cm.
Push the water
drain hose fully
through the and
secure it using
fixing material.
15
Advertisement
Table of Contents
