Sony BDV-E870 Operating Instructions Manual page 63

Symptom Problems and solutions
Vide() signals arc only output * Set [Output Video Format] in [Screen Settings] to [Component Vide()]
from the HDMI OUT jack when (page 55).
connectiug the HDMI OUT j ack
and other vide() output jacks at
the same time.
The dark area of the picture is too • Set [Picture Quality Mode] to [Standard] (default) (page 35).
dark/the bright area is too bright
or unnatural.
The picture is not output • Check the [Output Video Format] settings in [Screen Settings] (page 55).
correctly. • If the analog and digital signals are output at the same time, set [BD/DVD-
ROM 1080/2@ Output] in [Screen Settings] to [Offl (page 55).
• For BD-ROMs, check the [BD/DVD-ROM 1080/2@ Output] settings in
[Screen Settings] (page 55).
Picture noise appears. • The disc is dirty or flawed.
• If the picture output from your system goes through your VCR to get to your
TV, the copy-protection signal applied to some BD/DVD programs could affect
picture quality. If you still experience problems even when you connect your
unit directly to your TV, try connecting your unit to the other input jacks.
• The aspect ratio on the disc is fixed. Even though you set the aspect
ratio in [TV Type] of [Screen
Settings], the picture does not fill
the TV screen.
Color irregularity occurs on the
TV screen.
• If the speakers
are used with a CRT-based TV or projector, install the speakers
at least 1.0 ft (0.3 meters) from the TV set.
• If the color irregularity persists, turn ofl' the TV set once, then turn it on after 15
to 30 minutes.
• Make sure that no magnetic object (magnetic latch on a TV stand, health care
device, toy, etc.) is placed near the speakers.
Sound
symptom
There is no sound.
Problems and solutions
• The speaker
cord is not connected securely.
• Check the speaker settings (page 50).
• Fast li)rward or fast reverse is performed. Press _ to return to normal play
mode.
• Slow forward or freeze frame is performed. Press _ to return to normal play
lnode.
No sound is output from the
• Set [Audio Output]
to [HDMI] (page 56).
HDMI OUT jack.
The left and right sounds are • Check that the speakers and components are connected correctly and securely.
unbalanced or reversed.
There is no sound from the • Check the speaker connections and settings (pages 22, 50).
subwoofer.
n
n
u,
o
-I
o
&
o
63us