Step3: Performing The Easysetup - Sony BDV-E870 Operating Instructions Manual

Step3: Performing the
EasySetup
Before performing Step3
Make sure all connections are secure, and then
connect the AC power cord (mains lead).
Follow the Steps below to make the basic
adjustments for using the system.
Displayed items vary depending on the country
model.
m
• To use the optional surround back speakers, set
[Surround Back] in [Speaker Settings] to [Yes]
(page 50).
-- I/_
¢e/,i,/4./.+,
@
C HOME
1 Turn on the TV.
2
Connect the calibration mic to the
A.CAL MIC ack on the rear panel.
Set up the calibration lilic fit ear level using
a tripod, etc. (not supplied). The t]'ont of
each speaker should face the calibration
mic, and there should be no obstruction
between the speakers and the calibration
mic.
Calibration mic
3
4
Press I/_ on the unit.
Switch the input selector on your TV so
that the signal from the system
appears on the TV screen.
The Easy Setup Display for OSD language
selection appears.
Easy Setup 0s0
Selectthe language 1o be displayed by this unit
( Eiiglish )
Francais
Espa_ol
Ponuqu_s
28us