evertz exponent 500DA-L Manual

evertz exponent 500DA-L Manual

Reclocking distribution amplifier for digital looping frame

Advertisement

Quick Links

1.
OVERVIEW......................................................................................................................................... 1
2.
INSTALLATION.................................................................................................................................. 3
3.
SPECIFICATIONS.............................................................................................................................. 4
3.1. SERIAL VIDEO INPUT .............................................................................................................. 4
3.2. SERIAL VIDEO OUTPUTS........................................................................................................ 4
3.3. ELECTRICAL ............................................................................................................................ 4
3.4. PHYSICAL ................................................................................................................................. 4
4.
STATUS LEDS ................................................................................................................................... 5
5.
JUMPERS AND USER ADJUSTMENTS ........................................................................................... 6
5.1. CONNECTING LOOP THRU..................................................................................................... 6
BY THE GLOBAL FRAME STATUS......................................................................................... 6
5.3. SELECTING THE RECLOCKING RATE .................................................................................. 7
5.4. SELECTING NON-RECLOCK MODE ....................................................................................... 7
Figures
Figure 1-1: 500DA-L Block Diagram ................................................................................................................... 2
Figure 2-1: 500DA-L Rear Panel Overlay ........................................................................................................... 3
Figure 5-1: LED and Jumper Locations .............................................................................................................. 6
500DA-L Reclocking Distribution Amplifier for Digital Looping Frame

TABLE OF CONTENTS

Revision 0.3
Frame Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the exponent 500DA-L and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for evertz exponent 500DA-L

  • Page 1: Table Of Contents

    Frame Manual 500DA-L Reclocking Distribution Amplifier for Digital Looping Frame TABLE OF CONTENTS OVERVIEW............................1 INSTALLATION..........................3 SPECIFICATIONS..........................4 3.1. SERIAL VIDEO INPUT ......................4 3.2. SERIAL VIDEO OUTPUTS......................4 3.3. ELECTRICAL ..........................4 3.4. PHYSICAL ..........................4 STATUS LEDS ........................... 5 JUMPERS AND USER ADJUSTMENTS ...................
  • Page 2 Jul 07 Information contained in this manual is believed to be accurate and reliable. However, Evertz assumes no responsibility for the use thereof nor for the rights of third parties, which may be effected in any way by the use thereof. Any representations in this document concerning performance of Evertz products are for informational use only and are not warranties of future performance, either express or implied.
  • Page 3: Overview

    500DA-L Reclocking Distribution Amplifier for Digital Looping Frame OVERVIEW The 500DA-L is a re-clocking distribution amplifier for use in the Evertz high density digital looping frame (the 500FR-L-D). The 500DA-L supports all data rates included in SMPTE 259M (143 Mb/s - 360 Mb/s) and SMPTE 344M (540 Mb/s), as well as DVB-ASI.
  • Page 4: Figure 1-1: 500Da-L Block Diagram

    Frame Manual 500DA-L Reclocking Distribution Amplifier for Digital Looping Frame Cable Driver Array Serial Input 143- 540 Mb/s 8 Serial Outputs 143- 540 Mb/s 143Mb/s- 540 Mbs Equalizer Reclocker with bypass Passive Loop Thru Reclocker Reclocker DVB - ASI Warning Locked Enabled Enabled...
  • Page 5: Installation

    Frame Manual 500DA-L Reclocking Distribution Amplifier for Digital Looping Frame INSTALLATION The 500DA-L comes with a companion rear panel overlay that can be placed over the rear panel BNC connectors to identify their function. For information on inserting the module into the frame see section 3 of the 500FR chapter.
  • Page 6: Specifications

    Frame Manual 500DA-L Reclocking Distribution Amplifier for Digital Looping Frame SPECIFICATIONS 3.1. SERIAL VIDEO INPUT Standards: SMPTE 259M (143 Mb/s – 360 Mb/s) SMPTE 344M (540 Mb/s) SMPTE 310M (19.4 Mb/s) – non-reclocked DVB-ASI Connector: BNC per IEC 60169-8 Amendment 2 Equalization: 400m @ 270 Mb/s Return Loss:...
  • Page 7: Status Leds

    Frame Manual 500DA-L Reclocking Distribution Amplifier for Digital Looping Frame STATUS LEDS The 500DA-L has twelve LED Status indicators on the front card edge to show operational status of the card at a glance. Figure 5-1 shows the location of the LEDs. Two large LEDs on the front of the board indicate the general health of the module.
  • Page 8: Jumpers And User Adjustments

    Frame Manual 500DA-L Reclocking Distribution Amplifier for Digital Looping Frame JUMPERS AND USER ADJUSTMENTS MODULE STATUS LOCK CABLE LENGTH WARNING (C1)500DA-HD RECLOCKER BYPASS BYPASS 143M 177M BYPASS SELECT RECLOCK 270M 360M 540M SUPPORT FRAME STATUS +12V Figure 5-1: LED and Jumper Locations 5.1.
  • Page 9: Selecting The Reclocking Rate

    Frame Manual 500DA-L Reclocking Distribution Amplifier for Digital Looping Frame 5.3. SELECTING THE RECLOCKING RATE The SUPPORT jumper J3, located at the front of the module, determines whether the module will operate as a reclocking distribution amplifier with SMPTE 292M (1.5 Gb/s), SMPTE 259M or 344M (143 Mb/s - 540 Mb/s) or DVB-ASI video signals.
  • Page 10 Frame Manual 500DA-L Reclocking Distribution Amplifier for Digital Looping Frame This page left intentionally blank 500DA-L - 8 Revision 0.3...

Table of Contents