Table of Contents
Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for NATURESPY WIFI WILDCAM 2
Summary of Contents for NATURESPY WIFI WILDCAM 2
- Page 1 WIFI WILDCAM 2 INSTRUCTION MANUAL...
-
Page 2: Table Of Contents
CONTENTS: Notes before use……………………………..……………..……………..……………..……… Setting up your WiFi WildCam 2……………..……………..……………..……………..…… Connecting the Solar Panel……………..……………..……………..……………..………… Positioning your camera……………..……………..……………..……………..…………….. 5 Camera settings……………..……………..……………..……………..……………..………... Device information……………..……………..……………..……………..…………….. Sleep Mode……………..……………..……………..……………..……………..……… Basic Function Settings……………..……………..……………..………….…..……… Nightvision Mode……………..……………..……………..……………..………………. 7 Sounds……………..……………..……………..……………..……………..…………… 7 Motion Detection Settings……………..……………..……………..……………..…….. 7 Power Management Settings……………..……………..……………..……………..… Storage Settings……………..……………..……………..……………..……………….. 8 Recording Settings……………..……………..……………..……………..……………. - Page 3 We’ve developed the WiFi WildCam 2 based on feedback from our first edition of the camera, and out of our love for wildlife - as well as our mission to make wildlife watching easy and fun.
-
Page 4: Notes Before Use
Motion Detection: Motion triggered recording is automatically disabled when the NatureSpy app is open, but once you close / come out of the app this will be re-enabled after a few... -
Page 5: Setting Up Your Wifi Wildcam 2
CONNECTING THE SOLAR PANEL If you're pairing the WiFi WildCam 2 with the optional solar panel, follow these steps: 1. Remove the central rubber tab located at the base of the camera, identifiable by an electric bolt symbol (refer to the diagram below). -
Page 6: Positioning Your Camera
POSITIONING YOUR CAMERA The placement of your camera will have a strong influence on its performance. It's worthwhile to carefully choose an optimal position and make adjustments based on its performance as you use it. Height: Ideally, place your camera 1-2ft off the ground to maximise the sensitivity of the PIR sensor. -
Page 7: Camera Settings
CAMERA SETTINGS EXPLAINED To access your camera's settings, tap the three dots (...) symbol at the top right corner of the live view screen. Device information IP: This is a unique identifier for your camera, used to connect it to your network. Device ID: This is a number that uniquely identifies your camera. -
Page 8: Sounds
When turned off, the camera won't record any videos. Automatic recording is disabled when the NatureSpy app is open, but once you close your app this will be re-enabled. The icon will appear red when motion detection is turned on and grey when it is turned off. -
Page 9: Power Management Settings
SD card. It needs to be left on to allow the camera to record and save any footage. Schedule: This setting can be ignored on the WiFi WildCam 2. It does not affect the camera's operation. Offline notification Use this slider to control whether or not you receive a notification if the camera goes offline. -
Page 10: Share Device
Share Device This feature allows you to share access to your camera with another person, facilitating joint monitoring. To do this, the other person must have or create an account on the NatureSpy app. Add to Home Screen This option allows you to add a shortcut from your phone home screen directly to this camera. -
Page 11: How-Tos
How do I update my camera’s firmware? You can check for any new firmware updates in your camera’s settings menu. To do this: 1. Open the camera on the NatureSpy app 2. Open settings and scroll to the bottom of the page 3. Select “Device Update”... - Page 12 To do this: 1. Open the camera on the NatureSpy app 2. Open Playback and scroll to the video you want to save 3.
-
Page 13: Troubleshooting
My camera’s motion detection is not working Make sure that motion detection is turned on in the NatureSpy app. The icon in the ‘Features’ drawer will appear red when motion detection is turned on and grey when it is turned off. - Page 14 My camera no longer recognises the SD card If you encounter a message stating "your device has no memory", it indicates a problem with the microSD card in the camera. This issue sometimes occurs with cards being used for the first time.
- Page 15 My camera keeps going offline If your camera frequently loses connection or takes a long time to connect on the NatureSpy app, the WiFi connection might be weak in its current location. Your current signal strength is visible as a percentage on the live view screen.
-
Page 16: Need Support
Need Support? If you have any questions regarding your WiFi WildCam 2, get in touch with us by emailing shop@naturespy.org.
Need help?
Do you have a question about the WIFI WILDCAM 2 and is the answer not in the manual?
Questions and answers
How do I connect camera to new internet ? I’ve just switched internet provider, & now camera just says ‘offline’. I’ve searched your website for help/info to no avail
To connect the NATURESPY WIFI WILDCAM 2 camera to a new internet provider, follow these steps:
1. Open the NatureSpy app.
2. Tap the '+' symbol in the top right corner and select 'Add Device'.
3. Select the NatureSpy WiFi WildCam 2 camera.
4. Turn on the camera. The LED should flash blue and red quickly. If not, hold the on/off button on the camera base for 10 seconds to reset it.
5. Tap to continue in the app and enter your new WiFi network name and password. Note that only 2.4GHz WiFi is supported.
6. The app will prompt you to scan a QR code using the camera lens. Move your smartphone or tablet slowly back and forth in front of the lens.
7. Once the camera confirms the information, tap 'I heard a prompt' in the app to start pairing.
8. The pairing process may take up to 2 minutes.
If the connection is weak, move the camera closer to the router or use a WiFi extender.
This answer is automatically generated
How do I access the video recording length
The document does not provide specific instructions on how to access the video recording length on the NatureSpy WiFi WildCam 2. However, it mentions that increasing the video recording length may drain the battery faster and suggests using the standard 15-second recording for longer battery life. You may need to check the NatureSpy app settings or the camera’s menu to adjust the recording length.
This answer is automatically generated
My device has updated to V1.****7 and now I can’t put it into sleep mode. I use the camera at night and had been putting it to sleep mode during the day. How do I now do that? Thank you
To put the NATURESPY WIFI WILDCAM 2 into sleep mode after updating to V1.7, use the sleep mode slider in the camera settings. This disables motion detection, so no videos will be recorded automatically.
This answer is automatically generated
SHOWS ERROR MESSAGE 10008 WHEN TRYING TO SET UP CAMERA SETTINGS . HOW CAN I CORRECT PLEASE
I charged the camera up yesterday but now it shows three yellow lights on the camera case why is this please?