Table of Contents
Advertisement
DISPLAY
The display provides information about the
TUNEDCO
<a
PII
functioning of your world receiver:
Bit BISA
Lí
— While the radio is switched off, the
pa HH H E i
current time will be indicated. The first
¿ILLAS
KHz
time it is used, or if the memory is
a
NA
on ser
erased, '0:00' will appear on the display.
— When the radio is switched on, the frequency and the wave band will
be indicated.
~ When the alarm is switched on, the alarm mode (0/0) and the
alarm sign will be indicated.
— TUNED lights up when a certain station is correctly tuned to.
— co indicates stereo reception for FM.
-
CA
indicates that batteries should be replaced.
The settings are easy to check:
When the radio is off:
— The display shows the current time mode.
e If you wish to check the alarm time setting, press TIME SET briefly.
— The display will show the set alarm time.
— The alarm is enabled when the display shows steady alarm signs
(0/09).
— The alarm is disabled when the display shown no alarm signs.
— The display will return to the current time automatically after five
seconds (or press TIME SET briefly).
When the radio is on:
— The display shows the frequency.
e |f you wish to check the current time, press TIME SET briefly.
e if you wish to check the set alarm time, briefly press TIME SET
twice.
— The display will show the set alarm time.
— The alarm is enabled when the display shows steady alarm signs
(Y0/ o).
— The alarm is disabled when the display shown no alarm signs.
— The display will return to the frequency indication automatically after
five seconds (or press TIME SET briefly).
-—
———————w
—
eee
.—
e
—
—
Advertisement
Table of Contents
