Specifications - GE PXRQ400T Owner's Manual & Installation Instructions

Specifications

Reverse Osmosis System:
Models: PXRQ400T
CARTRIDGE SPECIFICATIONS
Performance data sheet is available at gewaterfilters.com
This system conforms to NSF/ANSI 58 for the specific performance claims as verified and substantiated by test data.
Non-potable Water Sources:
disinfection before or after the system. This system is certified for cyst reduction and may be used on disinfected water
that may contain filterable cysts.
Arsenic Reduction: This system shall only be used for arsenic reduction on chlorinated water supplies containing
detectable residual free chlorine at the system inlet. Water systems using an inline chlorinator should provide a one
minute chlorine contact time before the reverse osmosis system.
Nitrate/Nitrite Test Kit: This system is supplied with a nitrate/nitrite test kit. Product water should be monitored
periodically according to the instructions provided with the test kit.
Installations In the Commonwealth of Massachusetts:
be performed by a licensed plumber and do not permit the use of saddle valves. Plumbing code 248-CMR of the
Commonwealth of Massachusetts must be followed in these cases.
Product Water Testing: The Reverse Osmosis system contains a replaceable treatment component critical for the
effective reduction of total dissolved solids. Product water should be tested periodically to verify that the system is
performing properly.
Replacement of the reverse osmosis component: This reverse osmosis system contains a replaceable component
critical to the efficiency of the system. Replacement of the reverse osmosis component should be with one of identical
specifications, as defined by the manufacturer, to assure the same efficiency and contaminant performance.
WATER TEST KIT
and leave your contact details. They will contact you to find out what water tests you are interested in, and inform you of
the cost of the testing. You will then receive a kit that will include all necessary tests to properly indicate the performance
level of your system. Product water should be tested a minimum of every six months.
NOTE:
addition to the prefilter and postfilter.
5
49-6000289 Rev. 2