Installing the appliance
Place the mains plug on top of the appliance.
1.
Remove the grease filters.
2.
Hook the appliance into the appliance bracket from
3.
above so that it clicks firmly into place.
To align the appliance, if necessary, adjust the
4.
height of the appliance from above using a screw-
driver.
Secure the appliance from above using 2 nuts.
5.
Note: Do not knock the gas pressure dampers
6.
against the painted inner frame.
Clip the gas pressure dampers in on the left- and
right-hand side of the appliance.
Fit the glass panel.
7.
Hold the glass pane firmly with both hands.
‒
Hook the hinge plate from right to left into the
‒
counterpart on the appliance and engage it.
Hold the glass panel firmly until the two hinges are
engaged.
Installation instructions en
19