Table of Contents
Advertisement
<Example> Correcting a vocal mistake on Track 4
ff] Connect a footswitch to the PUNCH IN/OUT jack.
In this function, you will not use the REC button. You will press the footswitch shortly before
the punch in part.
2
Set Channel 2 Input Level switch to "(§)
Set this switch to "LOW" when you are using an external microphone.
[3] Turn the REC SEL button 4 to ON.
[4]
Locate the part on the tape just before the punch-in point.
}~5~
Press the PLAY button and start singing along with the sound on Tracks 1-4.
Use the Track 1-4 GAIN controls to adjust the Track 1-4 playback level, and use the
MASTER fader to adjust the monitoring level. Use the Channel 2 INPUT fader to adjust the
vocal recording level.
6
When the punch-in point is reached, press the footswitch.
Track 4 will enter record mode, and a new vocal phrase will be recorded.
[~7~
After recording, press the footswitch again. The XR-3 will dropoutfrom recordingand return
to playback.
23
Advertisement
Table of Contents
