Table of Contents
Advertisement
SEN04932-01
Type 2
1.
Disconnection
1)
Hold the tightening portion and push body
(7) straight until sliding prevention ring (6)
contacts contact surface (a) of the hexag-
onal portion at the male end. (Fig. 6)
2)
While holding the condition of Step 1), turn
lever (8) to the right (clockwise). (Fig. 7)
3)
While holding the condition of Steps 1)
and 2), pull out whole body (7) to discon-
nect it. (Fig. 8)
2.
Connection
q
Hold the tightening portion and push body
(7) straight until sliding prevention ring (6)
contacts contact surface (a) of the hexag-
onal portion at the male end. (Fig. 9)
30
00-200
Method of disassembling and connecting push-pull type coupler
200 Foreword and general information
D65EX, PX, WX-16
Advertisement
Table of Contents
