Logbook - Suunto AMBIT3 PEAK 2.5 User Manual

Suunto Ambit3 Peak
connect your Suunto Ambit3 Peak to your Movescount account, the interval timer is
synchronized to the watch.
You can specify the following information in the interval timer:
interval types (HIGH and LOW interval)
•
duration or distance for both interval types
•
number of times the intervals are repeated
•
NOTE: If you do not set the number of repetitions for the intervals in Movescount, the
interval timer continues until it has been repeated 99 times.
You can set an interval timer for each sport included in a multisport mode (see 3.21.2. Using a
multisport mode). The interval timer restarts when the sport changes.
To activate/deactivate the interval timer:
1. While you are in a sport mode, keep [Next] pressed to access the options menu.
2. Scroll to ACTIVATE with [Light Lock] and select with [Next] .
3. Scroll to Interval with [Start Stop] and select with [Next] .
4. Press [Start Stop] or [Light Lock] to set the interval timer On/Off and accept with [Next] .
When the interval timer is active, the interval icon is shown at the top of the display.
1.
Hold to
enter
options
4.
Interval
timer
On

3.18. Logbook

The logbook stores the logs of your recorded activities. The maximum number of logs and the
maximum duration of a single log depend on how much information is recorded in each
activity. GPS accuracy (see 3.22.3. GPS accuracy and power saving) and using the interval
timer (see 3.17. Interval timer), for example, directly impact the number and duration of logs
that can be stored.
You can view the log summary of your activity right after you have stopped recording or
through the LOGBOOK under the start menu.
The information shown in the log summary is dynamic: it changes depending factors such as
sport mode and whether or not you used an heart rate belt or GPS. By default, all logs include
at minimum the following information:
2.
[...............]
2s
ACTIVATE
[...............]
3.
[...............]
Interval ti...
[...............]
29