Table of Contents
Advertisement
en
Operating the appliance
End of programme
value ‹:‹‹ is indicated on the numerical
The programme has ended when the
display )*.
Automatic switch off after end
of programme or interior light*
* depending on model
To save energy, the dishwasher can be
automatically switched off 1 min or 120
min after the programme ends.
The setting can be selected from ˜:‹‹
to ˜:‹ƒ.
˜:‹‹ Appliance does not
switch off automatically.
The interior light 1"
comes on when the door
is opened irrespective of whether
the ON/OFF switch (
is switched on or off. When
the door is closed the light is off. If
the door is open for longer than 60
min., the light switches off
automatically. The interior light 1"
is lit only when the set value ˜:‹‹
is selected.
˜:‹‚ Appliance switches off after 1 min.
˜:‹ƒ Appliance switches off after 120
min.
24
Note
Note that with the settings ˜:‹‚ and
˜:‹ƒ, the interior light 1" is switched
off. To activate the interior lighting, press
the ON/OFF switch (.If the door is
open for longer than 60 minutes, the
light will switch off automatically.
1. Close the door.
2. Switch on ON/OFF switch (.
A u t o m a t i c s w i t c h o f f / i n t e r i o r l i g h t
3. Hold down programme button #
and press START button h
until •:‹... is indicated on the digital
display.
4. Release both buttons.
The LED for button # flashes
and the digital display )* displays
the factory setting •:‹....
button # until the value ˜:‹... is
5. Keep pressing programme
indicated on the numerical display
)*.
To change the setting:
1. Press programme button 3.
Each time the button is pressed,
when the value of ˜:‹ƒ has been
the set value increases by one level;
to ˜:‹‹.
reached, the display jumps back
2. Press START button h.
The set value is saved.
Switching off the appliance
Short time after the end of the
programme:
1. Switch off ON/OFF switch (.
2. Turn off the tap (not applicable if
Aqua-Stop fitted).
3. Remove the utensils when they have
cooled down.
Advertisement
Table of Contents
