Creek Audio CD50 mk2 Instruction Manual

Creek audio cd player instruction manual cd50 mk2

Advertisement

Congratulations on your purchase of the Creek CD50 mk2 CD player.
Please read this manual thoroughly. It will explain the features and operation of your CD50 MK2 and help to
ensure a trouble free installation. Unpack the player carefully. It is recommended that you save the carton and
packing material for future use, should you need to move your unit or return it for service.
Your CD Player is designed to work in a horizontal position. It is important to allow at least 5 cm of space
behind the unit for adequate ventilation. To avoid damage, never place the unit near radiators, in front of
heating vents, in direct sunlight or in an excessively humid or dusty location.
TO ACHIEVE MAXIMUM PERFORMANCE FROM YOUR CD PLAYER
Install the equipment in a location which is relatively free of moisture and dust, and which is well
ventilated.
The equipment may not be able to perform at its best in an extremely cold or hot environment. Do not
attempt to use below 41 o F/5 o C or above 95 o F/35 o C.
Always handle discs with clean hands.
Avoid using scratched discs.
Do not attempt to clean the CD player or discs with chemical solvents, as this may cause irreparable
damage. Use a clean, dry cloth, or specially designed cleaning materials for discs.
If the CD player malfunctions, do not open the unit and attempt to repair it yourself. This is a highly
technical product and requires specialist service - return it to your dealer.
Use batteries (2 x AAA) of the same type in the remote control handset. The use of odd or different type
cells will affect its performance. Batteries are supplied.
Keep this manual in a safe place for future reference.
CD50 mk2
CD Player
INSTRUCTION MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CD50 mk2 and is the answer not in the manual?

Questions and answers

Summary of Contents for Creek Audio CD50 mk2

  • Page 1 Congratulations on your purchase of the Creek CD50 mk2 CD player. Please read this manual thoroughly. It will explain the features and operation of your CD50 MK2 and help to ensure a trouble free installation. Unpack the player carefully. It is recommended that you save the carton and packing material for future use, should you need to move your unit or return it for service.
  • Page 2 SAFETY INFORMATION Designed to operate on 220-240 Volts 50Hz AC or 110-120 Volts 60 Hz AC, the CD50 mk2 is supplied with a mains lead with a fitted 3 pin plug suitable for the country of use. Should this plug need to be changed please note that the wires in the mains lead are coloured in accordance with the following code: Blue—Neutral...
  • Page 3: Explanation Of Controls

    3 4 5 SKIP BACK button SKIP FORWARD button SCAN BACK button SCAN FORWARD button REPEAT button SHUFFLE button CD50 mk2 Compact Disc Player 9 10 11 12 SCAN indicator SHUFFLE PLAY indicator A « B PLAY indicator REPEAT indicator...
  • Page 4: Remote Control Handset

    Such chemicals would irreparably damage the surface. Creek Audio Ltd has taken every care to ensure all types of compact discs play in the CD50 mk2. However, copy protected discs continue to be marketed without being compliant with all CD players. If this becomes a problem in the future, firmware upgrades to the ROM drive may become necessary.
  • Page 5: Removing The Disc

    CD command buttons only on the remote handset. The LED indicator will alternate from yellow colour in Standby mode to green when ready to play. Note: Amplifier or Tuner command buttons on the remote handset will not wake up the CD50 mk2. This enables other devices to run independtly.
  • Page 6: Inserting A Disc

    CD50 mk2 Compact Disc Player If the CD is deeply scratched, too dirty, or not recorded to Sony/Philips ‘Red Book’ standards, the disc may not play. If an improperly centered disc is played, noise will be heard in the mechanism. Avoid using such discs.
  • Page 7 Continuously pressing the by track, until you reach the desired place. The CD player can be advanced to the last track in this way. When the last track is reached, the CD player will return back to track 1.
  • Page 8: Shuffle Play

    (Remote control only) This feature allows you to play tracks in your preferred sequence. It is not possible to program the CD player while the disc is playing. So, press the STOP button first, then enter a program. ENTERING A PROGRAM...
  • Page 9: Changing The Program

    Press the PLAY button and the disc will start playing. At the end the last track the CD player will automatically return to the beginning of the first track. The repeat play will continue until the S T O P button is pressed.
  • Page 10 CD50 mk2 Compact Disc Player REPEAT A PROGRAMMED SEQUENCE OF TRACKS Enter a program. Press the REPEAT button twice and the REPEAT ALL message will appear. Press the PLAY button, the PLAY All programmed tracks will continue playing in order until the S T O P button is pressed.
  • Page 11: Troubleshooting Guide

    > 117dB < 0.0008% at 1 kHz, 0 dB 5 Kg / 11 lbs 430 x 62 x 250 mm CD50 mk2 Compact Disc Player CORRECTIVE ACTION Insert the power plug firmly into the AC outlet Replace the fuse in the mains plug...
  • Page 12 Creek Audio Limited 12 Avebury Court Mark Road Hemel Hempstead HP2 7TA United Kingdom Telephone: +44 (0) 1442 260146 Fax: +44 (0) 1442 243766 E-mail: info@creekaudio.co.uk Web: www.creekaudio.com Designed and Manufactured in the United Kingdom...

This manual is also suitable for:

Classic

Table of Contents

Save PDF