Appendix A Deauthentication Message Reason Codes; Deauthentication Message Reason Codes; Deauthentication Reason Code Table - Cisco WAP150 Manual

DeAuthentication Message Reason Codes

This appendix contains the following sections:
•
•
Deauthentication Message Reason Codes
When a client deauthenticates from the WAP device, a message is sent to the system log. The message includes
a reason code that may be helpful in determining why a client was deauthenticated. You can view log messages
when you click System Configuration > Notification > View System Log.
For more information, see

Deauthentication Reason Code Table

The following table describes the deauthentication reason codes.
Table 4: Deauthentication Reason Code Table
Reason code Meaning
0 Reserved
1 Unspecified reason
2 Previous authentication no longer valid
3 Deauthenticated because sending station (STA) is leaving or has left Independent Basic Service Set (IBSS)
or ESS
4 Disassociated due to inactivity
5 Disassociated because WAP device is unable to handle all currently associated STAs
6 Class 2 frame received from nonauthenticated STA
7 Class 3 frame received from nonassociated STA
Cisco WAP150 Wireless-AC/N Dual Radio Access Point with PoE / Cisco WAP361 Wireless-AC/N Dual Radio Wall Plate Access Point with PoE
Deauthentication Message Reason Codes, on page 123
Deauthentication Reason Code Table, on page 123
Deauthentication Reason Code Table, on page 123
A
A P P E N D I X
123