Table of Contents
Advertisement
W1G230-EB91-28
3.2 Nominal data
Motor
Phase
Nominal voltage / VAC
Frequency / Hz
Method of obtaining
data
Speed (rpm) / min
-1
Power consumption / W
Current draw / A
Max. back pressure / Pa
Min. ambient
temperature / °C
Max. ambient
temperature / °C
ml = Max. load · me = Max. efficiency · fa = Free air
cs = Customer specification · ce = Customer equipment
Subject to change
3.3 Technical description
Weight
Size
Motor size
Blade material
Fan housing material
Number of blades
Airflow direction
Direction of rotation
Degree of protection
Insulation class
Moisture (F) /
Environmental (H)
protection class
Installation position
Condensation
drainage holes
Mode
Motor bearing
Speed levels
Touch current
according to IEC
60990 (measuring
circuit Fig. 4, TN
system)
Motor protection
with cable
Protection class
assignment
Item no. 56099-5-9970 · ENU · Change 205632 · Approved 2022-10-06 · Page 5 / 11
ebm-papst Mulfingen GmbH & Co. KG · Bachmühle 2 · D-74673 Mulfingen · Phone +49 (0) 7938 81-0 · Fax +49 (0) 7938 81-110 · info1@de.ebmpapst.com · www.ebmpapst.com
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Operating instructions
M1G055-BD
1~
115
50/60
ml
1200
13
0.19
23
-30
50
1 kg
230 mm
55
PA plastic
PP plastic
5
V
Counterclockwise, viewed toward rotor
IP55
"B"
H1+
Any
None
S1
Ball bearing
2
<= 0.25 mA
Thermal overload protector (TOP)
internally connected
Lateral
II; This component for installation may
have several local protection classes.
This information relates to this
component's basic design.
The final protection class is based on
the component's intended installation and
connection. If there is a PE connection
point on the housing, it must not be
visible after installation.
Conformity with
EN 60034-1; EN 60204-1; EN 60335-1;
standards
EN 60335-2-24; EN 60335-2-80; EN
60335-2-89; CE
Approval
VDE; CSA C22.2 No. 77; UL 1004-3
; Use the device in accordance with its degree of protection.
Information on surface quality
The surfaces of the products conform to the generally applicable industrial
standard. The surface quality may change during the production period.
This has no effect on strength, dimensional stability and dimensional
accuracy.
The color pigments in the paints used perceptibly react to UV light over
the course of time. The product is to be protected against UV radiation to
prevent the formation of patches and fading. Changes in color are not a
reason for complaint and are not covered by the warranty. UV radiation
in the frequency range and the intensity of natural solar radiation has no
effect on the technical properties of the products.
3.4 Mounting data
Further mounting data can be taken from the product drawing or Chapter
4.1 Mechanical connection as required.
Strength class of
8.8
screws
For screw clearance, see Chapter 3.1 Product drawing
; Secure the screws against unintentional loosening (e.g. use self-
locking screws).
3.5 Transport and storage conditions
Max. permitted
+80 °C
ambient temp. for
motor (transport/
storage)
Min. permitted
-40 °C
ambient temp. for
motor (transport/
storage)
3.6 Electromagnetic compatibility
EMC immunity to
According to EN 61000-6-2 (industrial
interference
environment)
EMC interference
According to EN 61000-6-3 (household
emission
environment)
Advertisement
Table of Contents
