Advertisement
CcxXx-624
|
@ Magazine Holder Removal
1. Turn the tray motor to set the mechanism at the area
halfway between play and stop.
2. Undo the four screws and remove the magazine
holder.
Magazine Holder
©
@ Meshing of Gears When Assembling (fig.
shows top view of mechanism)
Cam
ring is turned all the way in the counter-
clockwise direction.
1. Tray extraction gear section
A) Intermittent gear
Intermittent
Cam Ring
Gear
Assemble by facing
shaft.
Fig.10
B) Acceleration gear
Assemble by overlapping the holes of the intermittent
gear and acceleration gear.
Acceleration
Gear
Fig.11
C) Idler gear
Assemble so that the tooth of the acceleration gear
with the A mark meshes with the valley of the idler
gear with the A mark.
Fig.12
D) Tray gear
Assemble so that the tooth of the idler gear with the
© mark meshes with the valley of the tray gear with
the O mark. Also, assemble so that the valley of the
tray gear with the A mark meshes with the last tooth
at the end of the tray extraction lever's rack.
Idler Gear
Tray Gear
Tray Extraction
:
Lever
Fig.13
Advertisement
