Basic Linked Shooting - Canon WFT-E7 Instruction Manual

Basic Linked Shooting

Link the sender camera and reciever cameras for basic linked shooting.
Preparing Reciever Cameras
First, set up reciever cameras by operating the cameras to use as
recievers. When using multiple reciever cameras, operate all reciever
cameras in the same way.
72
Select [Communication settings].
1
Under the [54] tab, select

[Communication settings], then
press <0>.
Select [WFT settings].
2
Select [Connection settings].
3
Select [LinkedShot].
4
Turn the <5> dial to select

[LinkedShot] at the bottom.