Table of Contents
Advertisement
Responding to Error Messages
46: For the data session, error code received from FTP
server
What to check on the FTP server
The connection was terminated by the FTP server.
Restart the FTP server.
Do the user rights for the FTP server allow reading, writing,
and log access?
Configure the FTP server's user rights to allow reading, writing,
and log access.
Do user rights allow access to the target folder on the FTP
server?
Configure the user rights for access to the target folder on the FTP
server to allow saving images from the transmitter.
Is the power of the FTP server on?
Turn on the FTP server. The server may have been turned off
because of an energy-saving mode.
Is the hard disk of the FTP server full?
Increase available space on the hard disk.
47: Image file transfer completion not confirmed by
FTP server
This error occurs if, for some reason, the transmitter fails to
receive confirmation from the FTP server that image file
transfer is complete.
Turn off and on the FTP server and camera, then transfer the
images again.
118
Advertisement
Table of Contents
