Canon WFT-E7 Instruction Manual page 53

Operation on the Camera-2
The settings for connecting to EOS Utility are now complete.
There is no need to complete pairing again if you will continue using

a particular camera to which the transmitter is attached and
computer together after pairing without changing the settings.
Configuring EOS Utility Connection Settings
Click [Connect] on the computer.
4
Select the camera to connect to, then

click [Connect].
If multiple cameras are displayed,

identify the camera to connect to by
its MAC address displayed on the
camera's LCD monitor.
The MAC address of the transmitter

can also be checked on the
[Function settings] screen (p.104).
Select [OK].
5
When the camera detects the

computer on which you clicked
[Connect] in step 4, the screen on
the left is displayed.
Select [OK] and press <0>. A

connection completion screen will
appear.
Select [OK].
6
Press <0> to return to the [WFT

settings] screen.
The <LAN> lamp on the transmitter

will light up in green.
Settings information is stored in the

camera. It is not stored in the
transmitter.
53