Table of Contents
Advertisement
1
Assembling
1.1
Installing/ Removing the battery
Installing the battery
1.
With the top of battery (the terminal with pole) facing up toward
the contacting points in the battery compartment, press the
bottom of battery slightly until it enters into place;
2.
Slide battery cover forward along the side slot until it clicks into
place.
Removing the battery
1.
Long press Power key to switch the phone off;
2.
Slide downward the battery cover;
3.
Use your nail to lightly lift the battery away.
1.2
Charging the battery
Your phone is powered by a rechargeable battery. When the battery
is weak, the battery sensor informs you. At this time, you need
charge the battery. When the battery becomes too weak for the
phone to operate, it switches off automatically.
Open the cover of the multifunction jack on the bottom of the
1.
device.
2.
Plug the small end of the travel adapter into the multifunction
jack.
Plug the large end of the travel adapter into a power outlet.
3.
When the battery is fully charged, unplug the travel adapter
4.
from the power outlet.
Unplug the travel adapter from the device.
5.
6.
Close the cover to the multifunction jack.
Note:
During charging, the phone can operate as usual. But the
1
Advertisement
Table of Contents
