Preparation / Getting Started - Philips 50PF7320G - 1 Manual

Preparation / Getting started

Positioning the TV set
1
10 cm
Place your TV set on a solid stable surface,
leaving a space of at 10 cm around the set.
2
Connections
• Insert the aerial plug into the 75Ω :
socket at the bottom of the set.
• Insert the mains plug into a wall socket
(220-240V / 50/60Hz).
NOTE
For more details on other
connections, refer to the
connection guide "CONNECT".
10 cm
10 cm
Using the Remote Control
3
Pull out the plastic sheet from the battery to
enable the remote control to operate.
4 Switching on the TV set
• To switch on the TV set, press the POWER
key. A green indicator comes on and the
screen lights up.
• If the TV set remains in standby mode (red
indicator), press the PROGRAM – / + key on
the keyboard or the P – / + key on the
remote control.
3