Preparation / Getting Started - Philips 32PFL3321S/60 User Manual

Preparation / Getting started

1 Positioning the TV set
10 cm
Place your TV set on a solid stable surface,
leaving a space of at 10 cm around the set.
Connections
2
• Insert the aerial plug into the 75Ω :
socket at the bottom of the set.
• Insert the mains plug into a wall socket
(220-240V / 50/60Hz).
• Ensure the power cord is fully inserted in
the TV mains socket and the wall socket.
Warning!
If the TV is mounted on a swivel base or
swivel arm, ensure no strain is placed on
the power cord when the TV is swivelled.
Strain on the power cord can loosen
connections. This may cause arching and
result in fire.
10 cm
10 cm
3
Using the Remote Control
Pull out the plastic insulation sheet from the
battery to enable the remote control to operate.
4
Switching on the TV set
• To switch on the TV set, press the POWER
button. A green indicator comes on and the
screen lights up.
• If the TV set remains in standby mode (red
indicator), press the PROGRAM – / + key on
the keyboard or the P – / + key on the
remote control.
3