Advertisement
i
|
i ;
ne
er
AM
Antenna
Connections
An AM loop antenna is included in the installation instructions bag.
Take out the connection line and connect it to the AM antenna
terminals. This loop antenna can be placed on top of any stable
surface or attached to a wall. Try several positions to determine
which gives the best reception. Be sure the antenna is not near a
speaker, power cord, television set, VCR, or motorized appliances.
When
using an external AM antenna, do not remove the loop an-
tenna; connect both antennas to the AM antenna terminals.
AM
loop antenna assembly
connect to the AM
antenna terminals.
tS
Remove the vinyl tie and
take out the connection
i
Bend in the reverse
line.
direction.
a.
With the antenna on
top of any stable surface
b. With the antenna
attached to a wall
Installation hole
Mount on a wall, etc.
NOTE:
Speaker Connections
(SPEAKERS)
1. Connect the speakers to A and/or B terminals.
ey)
© - pemore
CONTROL
TX-860/840
Poooe
3
RI
Disc PLAYER
nEMOS
CONTROL
RI
CASSETTE
REMOTE
TAPE DECK
CONTROL
An §RI remote control cable equipped with a 0.136" (3.5mm)
diameter miniature two-conductor phone plug is attached to
the TX-860/840
and to any compact disc player, with the
FRE mark.
NOTE:
Remote control operation is not possible when only the renote
control cable is connected. Remote contro! cable and pin cord
must be connected.
El
Advertisement
