Table of Contents
Advertisement
Use of the menus and the menu system
MAIN MENU
PICTURE
SCREEN
OPTIONS1
OPTIONS2
SET-UP
FREQUENCY
J SELECT
M SELECT
MENU OFF
PICTURE
L
CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
TINT
PICTURE MODE
COLOR TEMP.
NOISE RED.
J SELECT L M ADJUST
MENU RETURN
WHITE BALANCE
GAIN
L
RED
GREEN
BLUE
BIAS
RED
GREEN
BLUE
J SELECT
L M ADJUST
MENU RETURN
&
Press the
MENU.
é
Use the cursor button in the up/down directions to select the menus.
"
Press the cursor right to access the menu.
'
Use the cursor button in the up/down directions to select the menu items.
(
In case of a slider, move the cursor left/right to adjust.
§
Press the
Note: Only when in the US English language has been selected (see
LANGUAGE
Picture menu
Note:
- In
VGA
adjusted.
- If the message "can not adjust" appears when trying to adjust the picture settings,
be sure the
Contrast
This control allows you to adjust the contrast level of the picture.
M
Brightness
This control allows you to adjust the brightness level of the picture.
Sharpness
This control allows you to adjust the edge definition of a picture.
Color (only available when the source is
This control allows you to adjust the saturation level of the colors to suit your
personal preference.
Tint (only available when the source is
This control allows you to compensate for the color variations in NTSC
encoded transmissions.
Picture mode
This control allows you to select a picture mode according to the brightness of
the environment in which you are viewing the pictures on the monitor display.
Press the cursor left/right to select
room,
Memory
reset the picture to the settings predefined in the factory.
Color temperature
This control allows you to select the color temperature and the white balance
of the picture.
&
Press the cursor left/right to select 1 (bluer), 2 (standard), 3 (redder) or
M
PRO (white balance).
é
Select
PRO
"
Press the
'
Select and adjust Red-Green-Blue
level.
Select and adjust Red-Green-Blue
level.
Noise reduction
This control allows you to reduce the noise in the picture due to poor
reception or poor picture quality.
Select
OFF, NR-1, NR-2
Note: Select
settings.
Use of the menus and the menu system
button on the remote control to display/cancel the
MENU
button repeatedly to return or to switch the menu off.
MENU
, p. 13), the menu items will be displayed with additional icons.
mode only the
,
CONTRAST
BRIGHTNESS, COLOR TEMP.
is set to
PICTURE MODE
MEMORY
to keep the picture adjustments you adjusted yourself,
to adjust the white balance for bright and dark pictures.
button to display the
OK
Gain
Bias
or
according to the level of noise present.
NR-3
in the
menu, p. 11, to restore the predefined factory
RESET
OPTION 1
and
NOISE RED.
.
,
or
AV1
AV2
AV3
Y/CbPb/CrPr
AV1 (NTSC only), AV2 or AV3 (Y/CbPb/CrPr))
in a dark room,
Theatre
Normal
menu.
WHITE BALANCE
to adjust the white balance for signal
to adjust the white balance for black
MAIN
menu,
SET-UP
can be
)
in a bright
to
Reset
PICTURE
9
Advertisement
Table of Contents
