Pressing The Reset Button; The Startup Program - Sharp PT-9000 Operation Manual

5. Slide the battery case in until the main battery lock clicks.
6. Replace the battery compartment cover. If the battery
compartment cover is not replaced completely, the unit will not
power on.
Pressing the Reset Button
When you use the PT-9000 for the first time, press the reset button
behind the tilt stand on the bottom panel with a pointed object.
This will turn the PT-9000 power on automatically and load the
startup program.
If your PT-9000 does not turn on, go back to the battery
installation procedure and check the batteries installed correctly.
THE STARTUP PROGRAM
After the PT-9000 turns on, the indicator lights green for 10
seconds, the unit checks internal memory and initializes the unit.
Then the unit loads the startup program, the following messages
are displayed on the touch sensitive display:
CAUTION
Never turn off the unit during the initialization.
THE STARTUP PROGRAM
2.5