Table of Contents
Advertisement
Logic Element Replacement
(Continued)
5.
Insert the five hooks into the five slots of
the
video element.
6.
Holding the top edge of the front side of
the
video
element.
pull the logic element toward
you until the stand snaps into place.
7.
Make sure the logic element is locked onto
the video element by moving the logic elem
ent
forward and backward
.
8.
Turn the display station upside down.
(Continued on next page .)
13
Logic Element Replacement
(Continued)
9.
Insert
all
cables.
except the power cord.
into the video and logic elements and tighten
the screws.
10.
Make sure that the power switch is set to
a
(Off)
.
11. Insert the hollow end of the power cord
into the video element and the other end into
the wall outlet.
12.
Turn the security key fully clockwise
.
Set the power switch to I (On)
.
14
Advertisement
Table of Contents
