Sharp LC-121M2E Service Manual page 17

LC-121M2E
LC-150M2E
5-7. Shipping setting
(1)[Procedure]
Holding down the [AV INPUT] key and [MENU] key, turn on the main power, and simultaneously press the (inspection
process) [SELECT A] key and [VOL+] key to change the mode to the adjustment mode.
AV1
SETTING COMPLETE
(2)[Indication]
AV1 is indicated as SETTING COMPLETE.
(3)[Description]
Mode is memorized as SETTING COMPLETE.
Menu setting descriptions are as follows.
VOLUME 30
CONTRAST 30 (AV1 / AV2 / COMPONENT)
TINT 0 (AV1 / AV2 / COMPONENT) (ONLY NTSC)
COLOUR 0 (AV1 / AV2 / COMPONENT)
SHARPNESS 0 (AV1 / AV2 / COMPONENT)
RED 0 (AV1 / AV2 / COMPONENT)
BLUE 0 (AV1 / AV2 / COMPONENT)
COLOUR SYSTEM AUTO (AV1 / AV2 / COMPONENT)
TREBLE 0
BASS 0
BALANCE 0
BRIGHTNESS BRIGHT
UPSIDE NORMAL
RIGHT / LEFT NORMAL
AV2 IN / OUT IN
e RO See Se R e e e
17
pe