Table of Contents
Advertisement
I Operating peripheral equipment using theremote c ontrol I
Programming
TheIlluminated Remote C ontrol Using Access C odes
The Universal Remote Control can be programmed to operate many manufacturers'
components,
using the
component function buttons for TV, VCR, DBS/CABLE or DVD. Follow the procedures for programming
your Remote Control with or without a code for the component.
Determine
the manufacturer
of the component
and look in the table for the code.
Confirm that the external component is plugged in and operating.
Turn the component off.
Press POWER and OK together, for at least 5 seconds.
After 5 seconds, all the illuminated mode keys will begin to flash.
Release the POWER and OK keys.
Press the mode key.
The mode key will illuminate steadily, all others will go out.
5
6
®®®1
Enter the 3-digit component code using the Remote Control numeric
keypad.
Press the Remote Control
to test the component. If the
procedure is successful, the component will turn on.
Default
Modes
For Remote
Control
TV
VCR
DBS/CBL
DVD
TV (Panasonic
Only)
VCR (Preset)
DBS (Preset), CABLE (Preset)
DVD (Preset)
Panasonic
TV Codes
Panasonic
VCR Codes
Panasonic
DBS Codes
Panasonic
DVD Codes
Helpfui Hints: UnsuCCessful _
.....
If the component does not operate with the Remote Control, repeat the procedure using
another code. (Some brands have multiple codes).
If an incorrect code is entered, or if the procedure takes longer than 30 seconds,the
programming
will fail.
31
Advertisement
Table of Contents
