Operating Peripheral Equipment Using The Remote Control; Programming The Remote Control Code - Panasonic TC 19LX50 Operating Instructions Manual

Operating peripheral equipment using the remote control

Programming the remote control code

You can operate other manufacturers' components using this TV's remote control.
Preparations:
• Connect the plug of the external component to the wall outlet.
• Make sure the component is turned off.
POWER
CH
O K
VOL VOL
CH
RETURN
MENU
EXIT
TV/VIDEO RECALL MUTE GUIDE
1 2 3
4 5 6
7 8 9
SLEEP
R-TUNE
PROG
0
PLAY
REW FF
REC
PAUSE STOP
ASPECT
VCR/DBS CH
TV/VCR
T V
1
POWER
SAP
2
3
Notes:
• If the component does not operate with the remote control, repeat
the procedure using another code. (Some brands have multiple
codes).
• If an incorrect code is entered, or if the procedure takes longer
than 30 seconds, the programming will fail.
To find a code not listed in the index
After step 2 above,
CH
O K
+ Press and hold POWER and
VOL VOL
OK together, for at least 5
CH
seconds.
• The mode selection buttons
flash, then release POWER
and OK.
Select the type of the component.
• The selected button lights and
all others go out.
Enter the 3-digit infrared code
1 2 3
(see pages 26, 27).
4 5 6
• Factory default setting:
Panasonic
7 8 9
• Press POWER to test the
0
operation.
Press to select the code.
• The potential code is loaded for the device
selected in step 2.
• Press POWER button to test the operation.
• Repeat the steps until the component code is
found. It may take many attempts before the
correct code is found.
Press to store the code.
25