Samsung HT-A100 User Manual page 21

HDMi FUNCTION
Resolution Selection
This function allowsthe user to select the screen resolutionfor
HDMIoutput.
In Stop mode, press and hold the SD/HD (Standard
Definition/High Definition) button on the remote control for
longer than 5 seconds.
,, Resolutions available for the HDMI output are 480p, 720p,
1080i/1080p.
,, SD(Standard Definition) resolution is 480p and HD
(High Definition) resolution is 720p, 1080i/1080p.
The default value of HDMI output is 480P.
@
_ Ifthe TVdoesnot support t he configured resolution, y ouwill
not beableto seethe picture.
_ When anHDMI c ableis connected, composite a ndcomponent
video signals arenotoutput.
_ SeeyourTVowner'smanual formoreinformation o nhowto select
theTV's VideoInputsource.
Using Anynet+(HDMJ-CEC)
Why use HDMI (High Definition
Multimedia interface)?
This device transmits a DVD video
signal digitally without the process
of converting to analog. You will get
sharper digital pictures when using
an HDMI connection.
Anynet+ is a function that enables you to control other Samsung Deviceswith your SamsungTV's remote
control.Anynet + can be used by connecting this HomeTheaterto a SAMSUNGTV using an HDMICable.
This is only availablewith SAMSUNGTVsthat support Anynet+.
1. Connect the main unit of the Home Theater to a Samsung TV with an HDMI cable. (See page 19)
2. Set the Anynet+ function on your TV. With Anynet+
(See the TV instructions manual for more information.) You can operate this unit, power
,, You can operate the Home Theater by using the TV on your W, or watch a movieby
remote control. (AvailableTV buttons: (_), _, _, (_, pressingthe Playbutton on your
,&,Y and 41,_ buttons,@-(_button) Samsung TV's remotecontrol.
JfyOU select the TV
Set the Anynet+(HDMI-CEC) t o On by pressingthe Anynet+
button on your TV.
(, Receiver: On :Youcanlisten to audiothroughthe HomeTheater.
(, Receiver: Off : Youcan listento audiothroughthe TV.
Jfyou select the THEATER
SelectTHEATER to connector andsetthe optionof eachitemsbelow.
(, ViewTV :If Anynet+(HDMI-CEC)is set to on and you select
View TV, the Home Theater will automatically switch
to DIGITALIN mode.
,, THEATER Menu : You can access and control the Home
Theatermenu.
,, THEATER Operation ' The Home Theater disc playback
information will be displayed. You
can control the Disc operation of the
Home Theater such as title, chapter
and subtitle change.
,, Receiver : On ' You can listen to audio through the Home Theater.
,, Receiver : Off' You can listen to audio through the TV.
[_ _ TheTheaterfunctionis available onlywhenyoulistento the audiothroughthe HomeTheaterwiththe digital
optical c ableconnected.
21