Table of Contents
Advertisement
14) FILMING
When the trigger lock is released, the automatic exposure
control begins to function and the exposure (F -stop)
indicator in the viewfinder registers the shooting
aperture.
You can now start shooting merely by pulling the
trigger.
A_
Safety Lock
Push the lock button located directly below the shutter
release trigger all the way
up.
In this state, the trigger will
be locked to prevent accidental film run and the power
supply to the exposure meter will be switched off, thus
protecting against power drain
.
B. Continuous Run
For continuous run
,
pull the trigger in and push up the
lock button
.
When thus
adjusted,
the film drive will
con-
tinue 'to function even if you release the pressure of your
finger from the trigger
.
To stop filming
,
push down the
lock button. Continuous filming can also be accomplished
by mounting a cable release on the cable release socket
beside the trigger
.
23
Advertisement
Table of Contents
